Analysis of the processing steps of tombstone

Tombstone processing steps:

First, the factory management carefully reviews the tombstone processing CAD drawings, and affirms the selection of tombstone stones and the size control.

2. Use a diamond circular saw and a hand-pulled cutter to cut the block and make it have a basic profile. When a special profile is required, a diamond beaded wire saw can be used.

3. Use manual small machinery (such as double suction cup drilling machine, multi-functional stone cutting and grinding machine, multi-functional stone special-shaped chamfering machine and other stone machinery) to process arcs with different curvature radii, tombstone surface grooves, tombstone stone end faces Various geometric shapes and special-shaped curves, etc., make the outline basically shaped.

4. Use a hand grinder to grind the large plane, and use a small manual machine to grind other small end faces and curved surfaces.

5. Polish the large plane with a hand-held grinder, and polish other small end faces and curved surfaces with a small manual machine. Except for the relief appearance, all the smooth surfaces are polished. The whole process above is full of water. completed in the environment.

6. Carve the surface of the tombstone, and the carving is divided into relief, line carving, sinking bottom carving, black and white carving, shadow carving, etc.